Skip to main content
Version: 8.4.12.1

Schema: StockBookQuote (ID: 3000)

This table contains live equity quote records for all CQS/UQDF securities as well as US OTC equity securities, SpiderRock synthetic markets, and a number of major indexes. Each record contains up to two price levels and represents a live snapshot of the book for a specific market.

METADATA​

AttributeValue
Topic2990-market-data-stock
MLink TokenEqtMktData
SRSE ProductSRLive

Note: The symbol = next to a field number indicates that it is a primary key.

BODY​

#FieldTypeComment
10=tickerTickerKey
100updateTypeenum : UpdateType
103marketStatusenum : MarketStatusmarket status (open, halted, etc)
106bidPrice1floatbid price for best price level
109bidSize1intbid size for best price level
112bidExch1enum : StkExch
115bidMask1uintbid exchange bit mask for best bid price level
118askPrice1floatask price for best price level
121askSize1intask size for best price level
124askExch1enum : StkExchexchange
127askMask1uintask exchange bit mask for best ask price level
130bidPrice2floatbid price for next best price level
133bidSize2intbid size for next best price level
136bidExch2enum : StkExchexchange
139bidMask2uintbid exchange bit mask for next best bid price level
142askPrice2floatask price for next best price level
145askSize2intask size for next best price level
148askExch2enum : StkExchexchange
151askMask2uintask exchange bit mask for next best ask price level
154haltMaskuintbit mask of halted exchanges
157srcTimestamplongsource high precision timestamp (if available)
160netTimestamplonginbound packet PTP timestamp from SR gateway switch;usually syncronized with facility grandfather clock

Get Schema API Call​

import requests 

# Replace with your desired MLINK URL 
MLINK_PROD_URL = 'https://mlink-live.nms.saturn.spiderrockconnect.com/rest/json'

# Replace with your MLINK API Key
API_KEY = 'XXXX-XXXX-XXXX-XXXX'

# Replace with your desired MsgType.  
MSG_TYPE = 'StockBookQuote'

# Request Parameters for Get Schema Of The MsgType
params = {
#Required Parameters
"apiKey": API_KEY,
"cmd": 'getschema',
"msgType": MSG_TYPE, 
}

response = requests.get(MLINK_PROD_URL, params=params)

Get Msg API Call​

import requests 

# Replace with your desired MLINK URL 
MLINK_PROD_URL = 'https://mlink-live.nms.saturn.spiderrockconnect.com/rest/json'

# Replace with your MLINK API Key
API_KEY = 'XXXX-XXXX-XXXX-XXXX'

# Replace with your desired MsgType.  
MSG_TYPE = 'StockBookQuote'

# Replace with your pkey value for getting the specific message desired
PKEY = 'ReplaceThisValueForTheQueryToWork'

# Replace with your desired view. A "|" separated list of views can be provided
# If no view is provided, all views will be returned. 
VIEW = 'updateType|marketStatus|bidPrice1|bidSize1|bidExch1|bidMask1|askPrice1|askSize1|askExch1|askMask1|bidPrice2|bidSize2|bidExch2|bidMask2|askPrice2|askSize2|askExch2|askMask2|haltMask|srcTimestamp|netTimestamp'

# Replace with your desired where clause.
# a string in the form "field1:eq:valuse" or "(field1:ne:value1 & field1:ne:value2)
# "WHERE" clauses can contain the following comparison symbols:
# :gt: is greater than
# :ge: is greater than or equal to
# :lt: is less than
# :le: is less than or equal to
# :eq: is equal
# :ne: is not equal
# %26 is an AND statement
# | is an OR statement
# :sw: is starts with
# :ew: is ends with
# :cv: is contains values
# :nv: is does not contain value
# :cb: is contained between (two dates for instance) separated by '$'
WHERE = ''

# Request Parameters for getmsg Of The MsgType
params = {
    # Required Parameters
    "apiKey": API_KEY,
    "cmd": 'getmsg',
    "pkey": PKEY,
    "msgType": MSG_TYPE,
    # Optional Parameters
    "view": VIEW, 
    "where": WHERE
}

response = requests.get(MLINK_PROD_URL, params=params)

Get Msgs API Call​

import requests 

# Replace with your desired MLINK URL 
MLINK_PROD_URL = 'https://mlink-live.nms.saturn.spiderrockconnect.com/rest/json'

# Replace with your MLINK API Key
API_KEY = 'XXXX-XXXX-XXXX-XXXX'

# Replace with your desired MsgType.  
MSG_TYPE = 'StockBookQuote'

# Replace with your desired view. A "|" separated list of views can be provided
# If no view is provided, all views will be returned
VIEW = 'updateType|marketStatus|bidPrice1|bidSize1|bidExch1|bidMask1|askPrice1|askSize1|askExch1|askMask1|bidPrice2|bidSize2|bidExch2|bidMask2|askPrice2|askSize2|askExch2|askMask2|haltMask|srcTimestamp|netTimestamp'

# Replace with your desired where clause.
# a string in the form "field1:eq:value" or "(field1:ne:value1 & field1:ne:value2)
# "WHERE" clauses can contain the following comparison symbols:
# :gt: is greater than
# :ge: is greater than or equal to
# :lt: is less than
# :le: is less than or equal to
# :eq: is equal
# :ne: is not equal
# %26 is an AND statement
# | is an OR statement
# :sw: is starts with
# :ew: is ends with
# :cv: is contains values
# :nv: is does not contain value
# :cb: is contained between (two dates for instance) separated by '$'
WHERE = ''

# Replace with your desired limit of how many messages you receive. The default limit is 500
LIMIT = 500

# Order clause eg. "(field1:DESC | field1:ASC | field2:DESC:ABS | field2:ASC:ABS" (default is unordered; default is faster)
ORDER = 'updateType:ASC'

# Request Parameters for getmsgs Of The MsgType
params = {
    # Required Parameters
    "apiKey": API_KEY,
    "cmd": 'getmsgs',
    "msgType": MSG_TYPE,
    # Optional Parameters
    "view": VIEW, 
    "where": WHERE,
    "limit": LIMIT,
    "order": ORDER
}

response = requests.get(MLINK_PROD_URL, params=params)

Get Aggregate API Call​

import requests 

# Replace with your desired MLINK URL 
MLINK_PROD_URL = 'https://mlink-live.nms.saturn.spiderrockconnect.com/rest/json'

# Replace with your MLINK API Key
API_KEY = 'XXXX-XXXX-XXXX-XXXX'

# Replace with your desired MsgType.  
MSG_TYPE = 'StockBookQuote'

# Replace with fields you want to see aggregate values for. A "|" separated list of measures should be provided
MEASURE = 'updateType|marketStatus|bidPrice1|bidSize1|bidExch1|bidMask1|askPrice1|askSize1|askExch1|askMask1|bidPrice2|bidSize2|bidExch2|bidMask2|askPrice2|askSize2|askExch2|askMask2|haltMask|srcTimestamp|netTimestamp'

# Replace with fields you want to see aggregated. A "|" separated list of fields should be provided
GROUP = 'updateType|marketStatus|bidExch1|askExch1|bidExch2|askExch2'

# Replace with your desired where clause.
# a string in the form "field1:eq:value" or "(field1:ne:value1 & field1:ne:value2)
# "WHERE" clauses can contain the following comparison symbols:
# :gt: is greater than
# :ge: is greater than or equal to
# :lt: is less than
# :le: is less than or equal to
# :eq: is equal
# :ne: is not equal
# %26 is an AND statement
# | is an OR statement
# :sw: is starts with
# :ew: is ends with
# :cv: is contains values
# :nv: is does not contain value
# :cb: is contained between (two dates for instance) separated by '$'
WHERE = ''

# Request Parameters for getaggregate Of The MsgType
params = {
# Required Parameters
"apiKey": API_KEY,
"cmd": 'getaggregate',
"msgType": MSG_TYPE,
"measure": MEASURE,
"group": GROUP,
# Optional Parameters
"where": WHERE,
}

response = requests.get(MLINK_PROD_URL, params=params)

Get Count API Call​

import requests 

# Replace with your desired MLINK URL 
MLINK_PROD_URL = 'https://mlink-live.nms.saturn.spiderrockconnect.com/rest/json'

# Replace with your MLINK API Key
API_KEY = 'XXXX-XXXX-XXXX-XXXX'

# Replace with your desired MsgType.  
MSG_TYPE = 'StockBookQuote'

# Replace with your desired where clause.
# a string in the form "field1:eq:value" or "(field1:ne:value1 & field1:ne:value2)
# "WHERE" clauses can contain the following comparison symbols:
# :gt: is greater than
# :ge: is greater than or equal to
# :lt: is less than
# :le: is less than or equal to
# :eq: is equal
# :ne: is not equal
# %26 is an AND statement
# | is an OR statement
# :sw: is starts with
# :ew: is ends with
# :cv: is contains values
# :nv: is does not contain value
# :cb: is contained between (two dates for instance) separated by '$'
WHERE = ''

# Request Parameters for getCount Of The MsgType
params = {
# Required Parameters
"apiKey": API_KEY,
"cmd": 'getcount',
"msgType": MSG_TYPE,
# Optional Parameters
"where": WHERE,
}

response = requests.get(MLINK_PROD_URL, params=params)